STICK ELECTRODES. Made in the U.S.A.
| Grade |
Composition and/or Description |
Recommended Uses |
| E6011 |
Steel electrode produces spray type arc with deep penetrating
welds. |
Welding mild steels, galvanized, and some low alloy steels.
Operates on AC or DCEP |
| E6013 |
Steel electrode for general purpose welding. |
General purpose welding with small AC and power sources having
low open-circuit voltage. AC and DC use. |
| E7014 |
Iron powder covering |
Operates on AC, DCEN, or DCEP |
| E7018 |
Iron powder, low hydrogen type with spatter-free arc. |
Operates on AC or DCEP |
| E7024 |
Iron powder, heavy coated electrode with low penetration, . |
Operates on AC or DCEP |
| E316L-16 |
Welds molybedenum-bearing austenitic alloys containing 0.03%
maximum carbon. |
Welds molybedenum-bearing austenitic alloys containing 0.03%
maximum carbon. |
| Ni-55 |
Nickel iron for repairing large defects in cast iron, joining
sections over 1/4" thick. |
Welding nodular, malleable and alloy cast irons;
high-phosphorus castings. |
| ENiFeCl |
Nickel iron for repairing large defects in cast iron, joining
sections over 1/4" thick. |
Welding nodular, malleable and alloy cast irons;
high-phosphorus castings. |
| Ni-99 |
Nickel for repairing small defects in cast-iron. |
Welding thin cast iron sections together or to steel. |
| ENiCl |
Nickel for repairing small defects in cast-iron. |
Welding thin cast iron sections together or to steel. |
WELDING WIRE. Made in the U.S.A.
| Grade |
Composition and/or Description |
Recommended Uses |
| ER4043 |
5% Si bare Aluminum welding wire. Flows freely at 1155º F. |
For welding 3003, 3004, 5052, 6061, 6063, casting alloys 43, 355,
356, and 214. |
| ER5356 |
5% Mg bare Aluminum welding wire. Flows freely at 1180º F. |
Joining 5050, 5052, 5083, 5454, and 5456. |
| ER70S3 |
Si and Mg deoxidized wire for MIG/MAG. |
Mild and low alloy steel. General purpose fabrication. |
| ER70S6 |
High combination of Mg and Si deoxidizers. |
Smoother bead resulting in minimal post-weld grinding. |
| E71T-GS |
Self-shielded Flux Cored Wire |
Single pass welding of mild and low alloy steels. |
| 308L |
.03% carbon Stainless Steel Wire |
For welding AISI types 304L, 308L, 321, and 347. |
|
Tools &
Welding Products